Авторизація    

ПРОДУКЦІЯ

Останні новини

Потайные петли Dirak для встраиваемых дверей на складе АКАТЕХ

Потайные петли Dirak для встраиваемых дверей на складе АКАТЕХ ...

Новости

Галерея

Галерея Галерея Галерея Галерея
  1. Главная
  2. Индикаторы положения
  3. Индикаторы положения с полым валом
  4. OP5

OP5

Загрузить PDF Завантажити PDF
Узнать цену Article drawing specification Inox
OP5
1. Positioning push button
2. Lock pin
3. Fixing screw
4. 2 Ø2,5x8 fixing holes
5.Dust seal

This is a 5-digit indicator to adjust and to read directly a motion or an angle, obtained by a drive shaft rotation.

• Shock-proof, self-extinguishing technopolymer case. Protection IP54. Max. temperature: 70°C .

• Reading with 45° inclination view.

• 5 digits counter (standard red digit indicates decimals; on request 2 red digits for hundredths or 5 black digits) with readings until 99999. Digit height mm 5,5.

• On request special ratios and measures in Inch.

• Standard shaft hole: 20 H; different holes smaller than 20 with reducing bush (see p. 26).

• Model OP5 with roller for positioning and zero-setting AZZ. 4 digits counter.

• It is possible to reverse the counting direction ratios from pitch 1 to pitch 15

• Model IN with inox metallic parts.

• Colours: orange RAL 2004, black RAL 9005

• Available attachments (see p. 24): anodized aluminium shaft block flange.

ASSEMBLING

Introduce the indicator through the hollow shaft and set the lock pin into the ø6 arranged hole. Set the instrument on the inner (zero) value and block the fixing screw.

//