MATERIAL
Reinforced and stabilised polyamide
Oils and greases resistant.
CENTRAL CAP
Grey polyamide (RAL 7035 cod. 13).
ALTERNATIVE CAP COLOUR
Orange (RAL 2004 cod. 02)
Blue (RAL 5015 cod. 07)
Yellow (RAL 1021 cod. 10)
Red (RAL 3000 cod. 16)
Green (RAL 6024 cod. 17)
Black (RAL 9011 cod. 01)
LOCKING PISTON KIT
(1) PA6+GF hole cover ring. Black (RAL 9011). Push-fit assembly. Removable.
(2) PA6+GF piston holder. Black (RAL 9011). Assembly with two self-tapping, galvanised steel screws, screwdriver head 3.5x30.
(3) PA6+GF gear stick d. 26 with M4 brass female threaded insert and positioning brackets. Black (RAL 9011).
(5) PA6+GF gear stick support with positioner. Black (RAL 9011).
(6) Galvanised steel return spring.
(7) Galvanised steel washer.
(8) Galvanised steel locking piston. Seat for Allen wrench no. 5 for fastening. Piston stroke 10 mm. Useful projection from handwheel 8 mm.
INSERTS
() Customised galvanised steel through-hole insert.
(4) Black-oxide treated hexagon socket button head screw ISO 7838 for fastening handle.
(9) (art. D602) Black-oxide treated steel insert with hexagonal threaded through-hole.
SIDE HANDLE
Flush, foldaway revolving handle, with hexagonal connection.
Made from reinforced polyamide (shape same as art. M202).
Black-oxide treated internal mechanism.
Fixing by means of black-oxide treated hexagon socket button head screw ISO 7838.
Grey polyamide push fit cap (RAL 7035 code 13).
For fixing system, or execution of keyway or square holes, please refer to the technical notes attached to the catalogue.
SPECIAL REQUEST
• It’s possible to supply the inserts with d1 bore by customer design, on request and for quantities.
• It’s possible to supply the inserts in different material and treatment-finishes, on request and for quantities.
• It’s possible to supply the products with colours ( reduced range) as shown in the table at page D-19, on request and for quantities.
Dm = It’s possible to increase the hole, by boring, until Dm (enlarge).
A.R. = By request
This type of product is an evolution of our traditional handwheel D207-350. By simply adding a special assembly kit this product can be adapted for use in a
• It’s possible to supply the inserts with d1 bore by customer design, on request and for quantities.
• It’s possible to supply the inserts in different material and treatment-finishes, on request and for quantities.
• It’s possible to supply the products with colours ( reduced range) as shown in the table at page D-19, on request and for quantities.
Dm = It’s possible to increase the hole, by boring, until Dm (enlarge).
SPECIAL MARKET SECTOR: THAT OF COMPACT SHELVING (SLIDING STORAGE SYSTEMS ON RAILS).
This handgrip is suitable for handling shelving on rails. A locking device or piston is used to lock, stop, position the shelving units in specific positions