D602

MATERIAL

Reinforced and stabilised polyamide

Oils and greases resistant.

SURFACE

Satin.

COLOUR

Black (RAL 9011).

CENTRAL CAP

Grey polyamide (RAL 7035 cod. 13).

ALTERNATIVE CAP COLOUR

Orange (RAL 2004 cod. 02)

Blue (RAL 5015 cod. 07)

Yellow (RAL 1021 cod. 10)

Red (RAL 3000 cod. 16)

Green (RAL 6024 cod. 17)

Black (RAL 9011 cod. 01)

LOCKING PISTON KIT

(1) PA6+GF hole cover ring. Black (RAL 9011). Push-fit assembly. Removable.

(2) PA6+GF piston holder. Black (RAL 9011). Assembly with two self-tapping, galvanised steel screws, screwdriver head 3.5x30.

(3) PA6+GF gear stick d. 26 with M4 brass female threaded insert and positioning brackets. Black (RAL 9011).

(5) PA6+GF gear stick support with positioner. Black (RAL 9011).

(6) Galvanised steel return spring.

(7) Galvanised steel washer.

(8) Galvanised steel locking piston. Seat for Allen wrench no. 5 for fastening. Piston stroke 10 mm. Useful projection from handwheel 8 mm.

INSERTS

() Customised galvanised steel through-hole insert.

(4) Black-oxide treated hexagon socket button head screw ISO 7838 for fastening handle.

(9) Black-oxide treated steel insert with hexagonal threaded through-hole.

SIDE HANDLE

Revolving handle Art. M202 (see Chapter M on page 18).

For fixing system, or execution of keyway or square holes, please refer to the technical notes attached to the catalogue.

SPECIAL REQUEST

• It’s possible to supply the inserts with d1 bore by customer design, on request and for quantities.

• It’s possible to supply the inserts in different material and treatment-finishes, on request and for quantities.

• It’s possible to supply the products with colours ( reduced range) as shown in the table at page D-19, on request and for quantities.

• It’s possible to supply the inserts with d1 bore by customer design, on request and for quantities.

• It’s possible to supply the inserts in different material and treatment-finishes, on request and for quantities.

• It’s possible to supply the products with colours ( reduced range) as shown in the table at page D-19, on request and for quantities.

OTHER

Dm = It’s possible to increase the hole, by boring, until Dm (enlarge).

A.R. = By request

This type of product is an evolution of our traditional handwheel D207-350. By simply adding a special assembly kit this product can be adapted for use in a

Dm = It’s possible to increase the hole, by boring, until Dm (enlarge).

SPECIAL MARKET SECTOR: THAT OF COMPACT SHELVING (SLIDING STORAGE SYSTEMS ON RAILS).

This handgrip is suitable for handling shelving on rails. A locking device or piston is used to lock, stop, position the shelving units in specific positions