Авторизація    

ПРОДУКЦІЯ

Останні новини

Потайные петли Dirak для встраиваемых дверей на складе АКАТЕХ

Потайные петли Dirak для встраиваемых дверей на складе АКАТЕХ ...

Новости

Галерея

Галерея Галерея Галерея Галерея
  1. Главная
  2. Индикаторы положения
  3. Индикаторы положения с полым валом
  4. OP12

OP12

Загрузить PDF Завантажити PDF
Узнать цену Article drawing specification Inox
OP12
1. Counter 1
2. Counter 2
3. Positioning push-button
4. 2 fori di fissaggio Ø2,5x10
5. Dust seal
6. Lock pin
7. Fixing screw

This is a digital indicator with two 5-digit counters to adjust and directly read a motion through a drive shaft rotation.

• Shock-proof self-extinguishing technopolymer. Protection IP64. Max. temperature 80°C.

• Reading with 18° inclination. Two counters with 5 digits (standard red digit indicates decimals; on request 2 red digits for hundredths or 5 black digits). Readings until 99999. Digit height: 5,5 mm.

• Standard shaft hole: 25H7. Smaller holes with reducing bush.

• Lock-pin: centre distance 40 mm (standard) or 30 mm (indicate I30).

• Counters models: increase-increase (DX-DX), decrease-decrease (SX-SX), increase-decrease (DX: referred to the higher counter 1), decrease-increase (SX: referred to the higher counter 1).

• OP12: 2 counters; OP12AZZ: high counter with positioning and zero-setting push-button; OP12R with the function of the two counter’ s change lever for measuring, for example, tool’ s radius ( pitch) or diameter (double pitch). OP12R with ratio until 1 rev=60.

• Colours: orange RAL 2004, black RAL 9005.

ASSEMBLING

Introduce the indicator through the hollow shaft and set the lock pin into the ø6 arranged hole. Set the instrument on the inner (zero) value and block the fixing screw.

//